Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Can SW convert Pro/E model and detail drawing?
- Thread starter bry593
- Start date
SW translation is only for Pro/E parts and assemblies. They lose their parametric capabilities from Pro/E. I never heard of translating a Pro/E drawing.
TOP
CSWP, BSSE
Phenom IIx6 1100T = 8GB = FX1400 = XP64SP2 = SW2009SP3
"Node news is good news."
TOP
CSWP, BSSE
Phenom IIx6 1100T = 8GB = FX1400 = XP64SP2 = SW2009SP3
"Node news is good news."
CorBlimeyLimey
Mechanical
No drawings from any 3D system will be converted by SW ... only the 3D model itself.
The models will be dumb solids, no features.
Cheers,
Anna Wood
SW2011 SP4, Windows 7 x64
Cheers,
Anna Wood
SW2011 SP4, Windows 7 x64
- Status