Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

CAN/CSA-G40.21

Status
Not open for further replies.
TCPhoenix

TCPhoenix

Mechanical
Joined
Jan 23, 2007
Messages
24
Is anyone familiar with CAN/CSA-G40.21. I need to know how CAN/CSA-G40.21 Grade 300W for channels, angles and plates compares to an A36 designation. Does A36 meet the CAN/CSA-G40.21 Grade 300W requirements?
 
Sort by date Sort by votes
Please don't cross post.

See thread330-189943
 
Upvote 0 Downvote
No, A36 will not meet the Grade 300W spec. A36 would be more like Grade 260W.

Joe Tank
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

MujtabaQA
  • Locked
  • Question Question
Who can explain about Thin-wall pipe as per ASTM standard
Replies
6
Views
2K
EdStainless
EdStainless
qcrobert
  • Locked
  • Question Question
How can steel manufacturer chemical composition differ from ASTM/ASME chem comp?
Replies
5
Views
1K
qcrobert
qcrobert
Truds
  • Locked
  • Question Question
Can anyway advise what the differen
Replies
2
Views
930
Truds
Truds
TenPenny
  • Locked
  • Question Question
Codes cannot be copyrighted if they are incorporated into law
Replies
2
Views
841
SWComposites
SWComposites
petemen10024
  • Locked
  • Question Question
How old of a Mill test certificate can be accepted for a project?
Replies
6
Views
2K
chicopee
chicopee

Part and Inventory Search

Sponsor

Back
Top