Can anyone help me with some connections???

[mrmudpants]

I have borrowed from my workplace a Summagraphics 9"x12" SummaSketch Professional Digitizer. The model number is MM 1812. The problem is it only has a 4 button mouse and no leads. Can anyone tell me how to connect it to my computer and what leads I require??? On the back of the unit it has a 9 pin male connection and a 25 pin female connection. Can anyone direct me to a web site that has an instruction manual for this item??? [sig][/sig]

 

[Imagineer]

You need a serial cable, available at any local computer or office supply store.

Summagraphics was bought by Calcomp a few years ago. You can get the drivers, etc. from them. Their website is:

http://www.gtcocalcomp.com.

Select Graphics Tablets from the Shortcuts at the bottom of the page.
[sig]<p> Imagineer<br><a href=mailto: > </a><br><a href= > </a><br> [/sig]

 

You have to connect it to COM1 port (9 pin male)
As per drivers you can try to select from AutoCAD
(preferences pointers - R14, or options pointers R2000)