Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Can anyone assist with a PAM Motor

Status
Not open for further replies.

Kevin Koh

Electrical
Joined
Aug 11, 2024
Messages
1
Location
ID
Can anyone assist with a PAM Motor Connection?
I have a 5.5/4 KW, 4/6 Pole 36 Slot Motor.
Span for each Coil is 1-7
There are 4 sets of 1 coil, 4 sets of 2 Coils in Series and 6 sets of 4 coils in Series
 
Connections may depend on the method of operation.
Does your motor use "Pole Inversion" or"Pole Inversion and Omission"?
Or;
Post the nameplate data and maybe someone will google up a manufacturers diagram.

--------------------
Ohm's law
Not just a good idea;
It's the LAW!
 
A winding diagram for this particular PAM two-speed winding, and for any other PAM, PPM, or Dahlander two-speed winding, can be found at the link below.
Link
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top