Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

can any one help me with a software in design a belt , pulleys and gears

Status
Not open for further replies.
AhmedDeiaa

AhmedDeiaa

Mechanical
Joined
Nov 1, 2014
Messages
29
Location
EG
can any one help me with a software in design a belt , pulleys and gears ?
 
Sort by date Sort by votes
Contact Gates Rubber company. Their website has helpful information to get you started.
There may be others, but I remembered Gates first.
 
Upvote 0 Downvote
Kisssoft is a reputable software too.
it can do all of what you requested.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

M
  • Question Question
Is there any reason a forged replacement gear would cause problems to surrounded cast gears?
Replies
9
Views
3K
dgeesaman
dgeesaman
T
  • Locked
  • Question Question
Can gears mesh with different operating pressure angle?
Replies
7
Views
4K
mfgenggear
mfgenggear
A
  • Question Question
Planetary Gears - Independent Rotation
Replies
3
Views
10K
astraios
A
Christo_AU
  • Question Question
V-Belt Wear
Replies
6
Views
3K
mfgenggear
mfgenggear
SwaggingIt
  • Locked
  • Question Question
Gear Design Software
Replies
4
Views
4K
mechedoc
mechedoc

Part and Inventory Search

Sponsor

Back
Top