Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations The Obturator on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Calculation mode: From Exact to approximate 1

Status
Not open for further replies.
CAD2015

CAD2015

Automotive
Jan 21, 2006
2,061
Hi,

How could I switch the approximate volume calculation to exact?
The volume should be 0.0037.

Capture_12_b6557j.png


CAD 2015
 
Replies continue below

Recommended for you

Sort by date Sort by votes
.0037 four decimal places after point. change in catia settings value for volume to 4 decimal places
Untitled_cikzm4.jpg
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

H
FROM CATIA V5 TO MAXSURF
Replies
0
Views
98
Hamzamd
H
H
  • Question
CATPart from Product name
Replies
3
Views
1K
hadzi11
H
R
  • Question
Problem when creating a function from two splines
Replies
0
Views
125
r1xn
R
Sidtha
Get the required proprties from the property window from the bundle segment in catia v5 using vba
Replies
3
Views
6K
crshears
crshears
Sidtha
  • Locked
  • Question
How to extract the values from prodcut properties window
Replies
1
Views
339
Sidtha
Sidtha

Part and Inventory Search

Sponsor

Back
Top Bottom