Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Calculation dew of compressed air

Status
Not open for further replies.

scdaiwei

Petroleum
Sep 27, 2007
21
The dew of Compressed air usually is concerned by us.
But we only can measure the dew of atmosphere pressure air.
So how the dew of atmosphere pressure air convert to Compressed air's? Are there some graphs or tables or formulas for it?
Thank you in advance.
 
Replies continue below

Recommended for you

scdaiwei

If know the dew point at atmospheric, then you can use the following:

Y = (0.0002*X^3+0.0117*X^2+0.3296*X+4.4326)/(OP *14.7*2.03603*25.4)*10^6/21.1

With X = dew point in C and OP (Operating Pressure)in bar. This will give you the moisture content in lb/MMSCF.

Greg Lamberson, BS, MBA
Consultant - Upstream Energy
Website:
 

There are plenty of threads dealing with dew points of compressed air. To mention just a few with useful information:

thread124-110630
thread391-111512
thread124-127163
 
Thank you.
Is there any software that can calculate the dewpoint?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor