Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Calculating Thread Geometry

Status
Not open for further replies.
makersmark

makersmark

Mechanical
May 29, 2014
5
I am having trouble finding thread geometry for modified buttress threads. I have found the formulas for standard buttress threads but am unable to find an information that can relate that geometry to the lead angle?
 
Status
Not open for further replies.

Similar threads

amarks
  • Locked
  • Question
Calculating Gas Velocity 1
2
Replies
21
Views
2K
amarks
amarks
monang77
  • Locked
  • Question
Leak thread through control line
Replies
1
Views
2K
A8yssUK
A8yssUK
Justaddaservo
  • Locked
  • Question
Calculating CFM requirement with leakage
Replies
7
Views
496
Heaviside1925
Heaviside1925
AHickman
  • Locked
  • Question
Calculating flowrate out of orifice 1
Replies
14
Views
1K
Snickster
Snickster
Mathew95
  • Locked
Formular for calculating the elastic Bend Radius of an Offshore/subsea Pipeline
Replies
8
Views
2K
LittleInch
LittleInch

Part and Inventory Search

Sponsor

Back
Top Bottom