Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

C3-ilex rtu

Status
Not open for further replies.
stec69

stec69

Electrical
Joined
Feb 19, 2008
Messages
6
Location
US
Recently we took over some rtu's and changed the protocol to DNP 3.0. The problem we have is the Binary points past point # 32 is changing with a delay of about 5 min. or so. Can anyone tell me what we are doing wrong?


Thanks
 
Status
Not open for further replies.

Similar threads

Alms88
  • Locked
  • Question Question
4 wire modbus RTU
Replies
2
Views
799
Alms88
Alms88
amurray
  • Locked
  • Question Question
RTUs - Trip/Close vs. Raise/Lower
Replies
3
Views
470
petetheswift
petetheswift
stec69
  • Locked
  • Question Question
Harris rtu d20
Replies
4
Views
263
stec69
stec69
gcaudill
  • Locked
  • Question Question
Modbus vs. Modbus RTU
Replies
5
Views
292
pchipkin
pchipkin

Part and Inventory Search

Sponsor

Back
Top