Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

C, H, N, D, P Class Waste Water Treatment Plants

Status
Not open for further replies.

cremesti

Civil/Environmental
Joined
Apr 12, 2010
Messages
18
Location
GB
C = BOD removal
H = ????
N = Nitrification
D = Denitrification
P = Phosphorus removal

Any one know what the H stands for in European waste water pollutant reduction standards???

thanks

rami
 
Can it be Hydrogen as an abbreviation for the pH value which is the negative logarithmic value of the Hydrogen ion (H+) concentration? H = Neutralization?
 
could be, might also be Hydrocarbons for oil/grease emulsion removal

but I woule like to know for sure. I cannot find the EU standard that is mentionning these classes

rami
 
Class +H plants indicate the elimination of carbon and nitrogen as well as the disinfection of the water in order to remove pathogens. While class +H is mandatory when the reclaimed water is to be discharged into water reserves, class C requirements are usually sufficient for small wastewater treatment plants used for domestic purposes.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top