Having issues with 1" mild steel, the dross seams to weld itself back together. I would like to know first what are the optimum settings for 1" mild steel? Is it possible I have a leak or a bad solenoid valve. We once where able to make cuts without issues. Thanks to anyone who can help......
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Bystar 3015 settings for 1" mild steel
- Thread starter Rich2021
- Start date
if it'sa CO2 laser, I'd look real hard at beam quality issues. Check the optics and make sure the beam purge air is clean or purge the beam delivery system w nitrogen
Chris Krug Maximum Up-time, Minimum BS
Chris Krug Maximum Up-time, Minimum BS
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question