Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Buttering

Status
Not open for further replies.
dungun

dungun

Mechanical
Joined
Dec 30, 2005
Messages
39
Location
MY
Hi
Construction of ASME Viii Div i spherical tank. I have joints thickness 40mm with double groove. Problem to control the shringkage, in the codes any permission for buttering?.
 
Sort by date Sort by votes
Yes. Buttering is just a weld technique that typically becomes part of the finished groove weld deposit.
 
Upvote 0 Downvote
See UW-42 for buttering. See UW-35 for shrink.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

HKrish
  • Locked
  • Question Question
Hardfacing Welding Procedure qualification with buttering & QW-216.5
Replies
0
Views
206
HKrish
HKrish
newweldeng09
  • Locked
  • Question Question
Buttering Question (ASME Section IX)
Replies
1
Views
301
weldstan
weldstan
FluidicTech
  • Locked
  • Question Question
Buttering with Inconel PQR and materials qualified under Section IX
Replies
5
Views
585
weldtek
weldtek
3lilaggies
  • Locked
  • Question Question
Buttering
Replies
4
Views
471
weldtek
weldtek

Part and Inventory Search

Sponsor

Back
Top