Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Burst Disk

  • Thread starter Thread starter cadenginee
  • Start date Start date
Status
Not open for further replies.
C

cadenginee

Guest
I am looking to perform disk burst analysis. A thin disk used to releive pressure at temperature. The aim is to clarify what thickness the material has to be and what pressure has to be applied to burst the disk, at pressures in the rage of 1000-1500 psi and temperatures 0-200 degrees C can this be done in Pro mechanica, and can anybody give pointers to how I can go about this.
 
Thanks,



I will purchase the 2001 version and have a look. The main thing was I din not want to purchase the package, if this type of analysiscould not be performed.
 
Status
Not open for further replies.

Similar threads

A
Simulating rotating disk
Replies
2
Views
3K
newera
N
J
Managing Disk Space Ressources
Replies
5
Views
4K
acook
A

Part and Inventory Search

Sponsor

Back
Top