-
1
- #1
MikeMilburn
Mechanical
Anyone have a service manual for a Novatome CD 480 burning table, it was origonally sold by Canadian Liquid Air (Linde) around 1985±. The conrol box was made by Westinghouse which was purchased by Cutler Hammer who have no info at all.
The problem I'm up against is adjusting the pots for the x and y axis, although there's only two motors there's at least 15 pots and without knowing which ones to adjust I's sure I'll screw it up.
Excuse me for posting this in a couple of forums, but I'm desperate...
thanks Mike
The problem I'm up against is adjusting the pots for the x and y axis, although there's only two motors there's at least 15 pots and without knowing which ones to adjust I's sure I'll screw it up.
Excuse me for posting this in a couple of forums, but I'm desperate...
thanks Mike