Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Burner Problem gas fired boiler

Status
Not open for further replies.

turbo65

Marine/Ocean
Joined
Nov 11, 2003
Messages
24
Location
PK
Hello guys,

I m using 8t/h natural gas fired boiler with echo flame burner(Italy) . I m facing problems with its electro hydraulic valve mounted on gas train assembly. This is modulating type burner and valve is SKP70 type. We are unable to adjust the valve at start up , once the boiler starts then it is OK. Does any one else has expierience on this valve.

thanks for any advise
 
Look into the controls,reostat, potentiometer, ussually the problems are there.
contact the valve and burner mfr.
ER
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top