Does anyone know the reason why a RSR would bleed gas continuously. I'm looking for a fix to a problem at a reg. station that is a remotely controlled station. There seems to be somewhat of a constant bleed. Would rebuilding the "block" on the RSR solve the problem?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Bristol remote set regulators
- Thread starter dongett
- Start date
That's the nature of the beast. We have to install catalytic heaters on these installations to keep the regulators from freezing up due to the bleed.
Becker makes non-bleed controls. Actually, they bleed, but the gas is exhausted into the outlet line.
There are other non-bleed (or minimal bleed) regulators available, depending on what pressure you are working with.
Becker makes non-bleed controls. Actually, they bleed, but the gas is exhausted into the outlet line.
There are other non-bleed (or minimal bleed) regulators available, depending on what pressure you are working with.
- Status