aeroengr12345
Mechanical
Is this possible? I have CMM, made scan of part and saved output as .igs file. When I open file in Catia V5R4 it just shows me like 1 line and a circle, no point cloud data. How do you get point cloud data in? Thanks!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Bringing in Point Cloud Data, V5R4
- Thread starter aeroengr12345
- Start date
- Status
Hi,
If you have Digitized shape Edition or Quick surface Reconstruction you can work with Clouds...
You should really change your R4 for R14, where you can position clouds together with spheres and plenty more options...
If you have Digitized shape Edition or Quick surface Reconstruction you can work with Clouds...
You should really change your R4 for R14, where you can position clouds together with spheres and plenty more options...
indocti discant et ament meminisse periti
Eric N.
Eric N.
- Status
Similar threads
