We have a crane being installed in our shop and we are trying to maximize all our height so the bridge runs very close to the runway.
We are in Ontario, Canada...just wondering if anyone knows whether there is a standard or regulation for a min. distance from the the bottom of the the brdige to the busbar itself.
Even just somewhere to look...i have done a good bit of searching around with mixed results. Our power is 575 feeding the crane.
Appreciate any direction.
Thanks Brad
We are in Ontario, Canada...just wondering if anyone knows whether there is a standard or regulation for a min. distance from the the bottom of the the brdige to the busbar itself.
Even just somewhere to look...i have done a good bit of searching around with mixed results. Our power is 575 feeding the crane.
Appreciate any direction.
Thanks Brad