Breaklines won't print!

[Beggar]

Recently I've found that my break lines no longer print even though they show normally on the screen. I've tried different line fonts and still no printing. I just tried the same thing from another SWX installation and it prints A-OK.

This appears to have started with the installation of SP4 (the neighboring machine is still on SP2). We're running SWX 2004 under Win 2K.

Anybody had similar issues?

 

[MElam]

SP4 added this as an option, but it is turned OFF by default (don't ask me why)

Go to System options, Drawings and check "Print breaklines in broken views"

 

[ctopher]

thread559-97698

 

[SBaugh]

SP4.1 is going to address this issue so when the SP is upgraded this option is turned on.

Regards,

Scott Baugh, CSWP

http://www.3dvisiontech.com

http://www.scottjbaugh.com

If you are in the SW Forum Check out the FAQ section

To make the Best of Eng-Tips Forums FAQ731-376

 

[MElam]

I thought I was having deja vue

 

[Beggar]

Thanks everybody.

The ironic thing is that I actually recall reading the original thread. That'll teach me to post without doing a search first.

If I hadn't been routed to the VAR voicemail I wouldn't have even posted.

Thanks again.