Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bracing member in STAAD Pro

Status
Not open for further replies.
Usimo

Usimo

Structural
Joined
May 26, 2004
Messages
15
Location
CA
Dear all!

When we analyse and design braced frame structures, we can define braces as truss members or frame members with moment releases at both ends (My and Mz).
Which is the best way to define braced members in STAAD Pro or in any other similar software

Thanking you in advance

Tharani
 
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question Question
Truss bracing
Replies
0
Views
1K
Master dan
M
S
  • Locked
  • Question Question
Engineering Proposal Estimation in 2024
Replies
1
Views
2K
bimr
bimr
A
  • Question Question
How to use SRM Inclusion in MIDAS GTS NX?
Replies
0
Views
7K
abrarnth
A
K
  • Locked
Minimum horizontal distance between water/domestic lateral lines for townhouse project in California
2
Replies
27
Views
13K
swazimatt
swazimatt
C
  • Locked
  • Question Question
Concrete in Bored pile head
Replies
4
Views
4K
BridgeSmith
BridgeSmith

Part and Inventory Search

Sponsor

Back
Top