Usimo
Structural
- May 26, 2004
- 15
Dear all!
When we analyse and design braced frame structures, we can define braces as truss members or frame members with moment releases at both ends (My and Mz).
Which is the best way to define braced members in STAAD Pro or in any other similar software
Thanking you in advance
Tharani
When we analyse and design braced frame structures, we can define braces as truss members or frame members with moment releases at both ends (My and Mz).
Which is the best way to define braced members in STAAD Pro or in any other similar software
Thanking you in advance
Tharani