Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bourdon tubes 1

Status
Not open for further replies.
Pras

Pras

Mechanical
Joined
Apr 3, 2002
Messages
32
Location
IN
Hi,

I need following info on the bourdon tube manufacturing :

What kind of heat treatment should be given after tube bending, if the materials are as follows :
(I) SS316
(II)CuSn8 (Werkstoff-Nr. 2.1030 DIN 17662)
(III)CuZn15 (Werkstoff-Nr. 2.0240)

Thanks in advance.

Pras
 
Status
Not open for further replies.

Similar threads

niccolo_tu
  • Locked
  • Question Question
Superheater tubes corrosion or erosion
Replies
13
Views
1K
Dhurjati Sen
Dhurjati Sen
Noumaan
  • Locked
  • Question Question
Weld Overlay on CS(SA 105M) P1 with SB 171M UNS C44300 (Tubesheet)
Replies
1
Views
230
Dhurjati Sen
Dhurjati Sen
isoca
  • Locked
  • Question Question
U-bend tubes heat treatment
Replies
8
Views
653
0707
0707
Metlgst007
  • Locked
  • Question Question
Tube to Tubesheet Strength Weld - Material selection
Replies
2
Views
410
EdStainless
EdStainless
Husaam
  • Locked
  • Question Question
Rejected PQR for Tube-to-Tubesheet Welding Procedure
Replies
6
Views
276
Husaam
Husaam

Part and Inventory Search

Sponsor

Back
Top