Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bottom Plate Weld Joint Through Sump

Status
Not open for further replies.
Leinster

Leinster

Mechanical
Joined
Sep 14, 2010
Messages
36
Location
KE
Is it acceptable to have a bottom plate joint at the centre of the storage tank. This would mean that a portion of the joint would be cut out for the sump. Would this constitute a 3 plate lap joint?
 
Status
Not open for further replies.

Similar threads

nabeel3
  • Locked
  • Question Question
Bottom plate Replacement_Heat Traetment
Replies
2
Views
3K
nabeel3
nabeel3
Inchtain
  • Locked
  • Question Question
Corroded Bottom Floor Plates Replacement
Replies
4
Views
4K
Inchtain
Inchtain
tmgczb
  • Locked
  • Question Question
How is pressure under tank bottom plate distributed？
Replies
11
Views
3K
IFRs
IFRs
nabeel3
  • Locked
  • Question Question
Tank Bottom Bevel
Replies
6
Views
4K
nabeel3
nabeel3
STEVE LIU
  • Question Question
Problems related to flat-bottom tank appearance
Replies
5
Views
2K
LittleInch
LittleInch

Part and Inventory Search

Sponsor

Back
Top