Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

  • Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bonding Lightning Conductors

Status
Not open for further replies.

lyledunn

Electrical
Joined
Dec 20, 2001
Messages
122
Location
GB
In the Uk it is a requirement to bond the lighning system to the main earth terminal of the electrical installation. I cannot see any worthwhile reason for this. Any comments?

Regards,

Lyledunn
 
Attempting equal relative potential at all points of the facility.
 

Note in a US electrical code book with reference to lightning-protection and premises-wiring systems: Bonding together of all separate grounding electrodes will limit potential differences between them and between their associated wiring systems.
 
Suggestion: It depends on the object distance protected by the lightning air terminals. If the lightning system is far, then it is not much effective to connect the lightning to some distant electrical grounding system. The Fall of Potential Method might be used to establish the necessity of bonding to the electrical grounding system.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top