Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bonding High Density Wood to Carbon.

Status
Not open for further replies.
dcmoore

dcmoore

Mechanical
Joined
Dec 8, 2004
Messages
30
Location
CA
Im a mechanical engineer looking for something that would bond these 2 things together permanently and that can withstand temps from -40cel to -80 cel.

unsure if this is even enough info.

any thoughts/help is appreciated
 
Status
Not open for further replies.

Similar threads

Qcprick63
  • Locked
  • Question Question
Help,bonding Bronze bushing to Carbon fiber block
Replies
0
Views
918
Qcprick63
Qcprick63
Stefan2211
  • Locked
  • Question Question
High temperature sealant for SS hoses 1200 °F with NPT thread
Replies
1
Views
1K
btrueblood
btrueblood
lucky-guesser
  • Locked
  • Question Question
Urethane to Steel Epoxy Suggestions
Replies
4
Views
1K
lucky-guesser
lucky-guesser
adbaco
  • Locked
  • Question Question
Glue 100% acryl awning canvas on wood
Replies
0
Views
765
adbaco
adbaco
mark512
  • Locked
  • Question Question
Bonding a Joint in Multiple Steps
Replies
1
Views
452
Compositepro
Compositepro

Part and Inventory Search

Sponsor

Back
Top