Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bond-slip in Abaqus

Status
Not open for further replies.
CC21

CC21

Structural
Joined
Mar 8, 2018
Messages
5
Location
SE
Hello!

I am trying to model a reinforced concrete deep beam in 2d using Abaqus. How do I best model the bond-slipping behavior of the reinforcement (type truss) in the concrete (type solid)?

 
Status
Not open for further replies.

Similar threads

I
  • Question Question
Wear in abaqus
Replies
8
Views
15K
Rama27
R
A
  • Question Question
Recreating Ansys Sim in Abaqus
Replies
0
Views
2K
Ariana_
A
Zain_117
  • Locked
  • Question Question
ABAQUS Bond Stress vs Slip in a prestressed concrete beam with strand
Replies
4
Views
345
Zain_117
Zain_117
A
  • Solved
Applying Local Coordinate System for BC in Abaqus
Replies
1
Views
4K
FEA way
FEA way
jball1
  • Question Question
Accumulation of error in Abaqus Explicit?
Replies
4
Views
791
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top