praveenjk7
Aerospace
After running checkmate i am getting error with blanked objects and i am finding dificulty in rectifying that error.
Please let me know to remove that error.
Please let me know to remove that error.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Blanked objects error after running checkmate
- Thread starter praveenjk7
- Start date
- Status
JohnRBaker
Mechanical
Are you saying that you did not want to check for blanked objects or is it that now that you've found that there are blanked objects, that you want them 'unblanked'?
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
- Thread starter
- #3
praveenjk7
Aerospace
yes i want to unblank those blanked objects and rerun checkmate to clear those error.
For your reference i have uploaded pic, in that pic i have highlighted the error. i am unable to find those blanked objects to unblank or to delete.
Please get me solution.
For your reference i have uploaded pic, in that pic i have highlighted the error. i am unable to find those blanked objects to unblank or to delete.
Please get me solution.
JohnRBaker
Mechanical
What 'test' did you invoke which resulted in this 'error' indicating that there were 'blanked' objects?
Also, were you aware that once you had that listing in the HD3D window that you can select an object using your cursor and then press MB3 to access operations that can be performed on that object, such as changing its status from Hidden to Shown?
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
Also, were you aware that once you had that listing in the HD3D window that you can select an object using your cursor and then press MB3 to access operations that can be performed on that object, such as changing its status from Hidden to Shown?
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
- Thread starter
- #6
praveenjk7
Aerospace
@ewh- i have tried with Invert shown and hidden and show all i am unable to view that blanked objects
- Thread starter
- #7
praveenjk7
Aerospace
in checkmate on of the criteria is to check blanked objects are there are nor. when we run with this criteria i am getting error like this.
yes JohnRBaker using that HD3D window if i go for show objects also i am unable to see that objects.
yes JohnRBaker using that HD3D window if i go for show objects also i am unable to see that objects.
- Thread starter
- #9
- Status
Similar threads
- Question
- Locked
- Question