Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

bimal impulse tester

Status
Not open for further replies.

handleonit

Mechanical
Joined
Nov 28, 2007
Messages
5
Location
US
I am trying to figure out on our BIMAL Impulse tester
how to adjust or figure out what to change. The problem is the Italian machine heats up the oil and on the machine the output is C°. We use a monitor to set the testing and see what data is being recorded. The monitor registors in F°. But F° is about 30 degrees off from the machine after translation. Anyone know what’s going on or who to look for in the yellow pages. Please do not say call the manufacture or distributor. Thanks
 
sounds like they forgot to add 32 degrees to the conversion

°F =(9/5)°C+32

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top