Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Biaxial oriented SAN

Status
Not open for further replies.

federau

Industrial
Joined
Mar 25, 2001
Messages
8
Location
LU
Who knows whether plastic plates from SAN are stretched biaxial?
The thickness should amount to 2 to 5 mm.
The sheets would have to be better than biaxial stretched h-PVC (e.g. ONDEX from Solvay) or PET.
 
I am not aware of the biaxial streching,
But I can give one application.
We are using SAN material in place of PC where we wanted the translucent dark blue colour of requriement and also the strength. We were able to match the colour. This component is been moulded.
Strength is surely less than that of PC but was sufficient for our requirement.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top