Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Best way to record a programs display

Status
Not open for further replies.

HDS

Mechanical
Jul 25, 2002
661
I have been using Snagit to record the display of one of our programs running an instrument to trouble shoot errors. It works great, even does compression on the fly, but the problem is that it will only record for about half an hour. Is there anything similar that will record overnight?
 
Replies continue below

Recommended for you

Are you using the free trial version, and is the 30 minute limit a restriction of the free version?
 
I asked tech support at Techsmith and they said that was a limit of the software itself not the trial. It was not exactly 30 minutes but something around that. There is also not a setting to keep making continuous 30 minutes captures.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor