I am look for information for selecting and installing Bently Nevada proximity probes into 8" Dodge Sleevoil Bearings. I have a customer who speced these out by name, but can't give me any information. I did some researching on my own and found that I need the 3300 XL 8mm series, but I can't find out what lengths I need.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Bently Nevada Proximity Probes
- Thread starter sloth4z
- Start date
Your best bet is to call Dodge and ask them, or your local Bently rep.
I assume you are talking about probe case length. Cable length is a function of how you run the cable (in conduit or not)and where you put the Jbox for the proximitors.
-The future's so bright I gotta wear shades!
Please see FAQ731-376 for tips on how to make the best use of the Eng-Tips Forums.
I assume you are talking about probe case length. Cable length is a function of how you run the cable (in conduit or not)and where you put the Jbox for the proximitors.
-The future's so bright I gotta wear shades!
Please see FAQ731-376 for tips on how to make the best use of the Eng-Tips Forums.
- Status