Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Bearing spread in case of angular contact bearings

Status
Not open for further replies.
Stressanalyst87

Stressanalyst87

New member
Joined
Feb 24, 2011
Messages
14
Location
US
Experts,

I have a doubt regarding how do we take spread in case of single row angular contact bearings?

The bearing configuration consists of 2 angular contact bearings placed back to back.

Any information regarding this would of great help to me.

Thanks ,
Anoop
 
Status
Not open for further replies.

Similar threads

Stress_Eng
  • Locked
  • Question Question
FEM Contact Analysis Variables
Replies
17
Views
14K
Stress_Eng
Stress_Eng
MrRogers1987
  • Locked
  • Question Question
Contact Conductance in Riveted Joint
Replies
8
Views
2K
geesaman.d
geesaman.d
joesm519
  • Locked
  • Question Question
Equivalent of "Measures" of Creo Simulate in Autodesk Nastran
Replies
0
Views
812
joesm519
joesm519
mrmyagi
  • Locked
  • Question Question
EN 13445-3 C.7.5 Limitation of primary stresses in case of tri-axial state of stress
Replies
1
Views
343
TGS4
TGS4
hammads23
  • Locked
  • Question Question
Non linear pot ptfe bearing
Replies
0
Views
395
hammads23
hammads23

Part and Inventory Search

Sponsor

Back
Top