cassian
Mechanical
- Jan 24, 2011
- 1
l am designing a trolley which is suppossed to carry 5 tones of material, can you help me with the formulars to calculate the bearing sizes
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
bearing calculations
- Thread starter cassian
- Start date
- Status
You need to provide a little more information as to the type bearings, playing ball or roller . Is this a trolley tramway, monorail, etc.
Is it possible to use a Monorail?
If you are in the US this will come under OSHA as a underhung device that requires some specific design requirements.
Is it possible to use a Monorail?
If you are in the US this will come under OSHA as a underhung device that requires some specific design requirements.
You will find a good treatment of the basics here:
(It's the Timken bearing catalog, engineering section)
(It's the Timken bearing catalog, engineering section)
- Status
Similar threads
- Locked
- Question
- Locked
- Question
