Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Barred Tees

Status
Not open for further replies.
youngcortez

youngcortez

Mechanical
Joined
Apr 25, 2007
Messages
1
Location
US
Does anyone know where I can find typical mechanical details for the bars in a barred tee (size, spacing, etc). The lead time for purchasing a barred tee is too long, so we'd like to just purchase a tee and have them weld the bars in it in the field. The tees we need are 12 X 12, 12 x 8, 12 x 4, and 16 x 12. Thanks!!
 
Sort by date Sort by votes
I have a detail of a barred tee, this is an AutoCAD file. I'm not sure how to get it to you thought? One question why would you need bars on the 12"x 4" tee? Normally any branch connection below half the main doesn't need to be barred? ...Or so has been my experience. ...Mark
 
Upvote 0 Downvote
youngcortez,
See thread378-185606.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

johnhovard23
  • Locked
  • Question Question
when does it want to use barred tee
Replies
2
Views
511
11echo
11echo

Part and Inventory Search

Sponsor

Back
Top