Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

B16.34 Additional allowances

Status
Not open for further replies.
Jagh1

Jagh1

Mechanical
Joined
Jul 30, 2013
Messages
1
Location
AU
Hi,
Could anybody elaborate what exactly is included in additional allowance to the B16.34 Min body thickness calculation for valves.
Will the minimum body calc without the allowance hold its nominated pressure class?

Regards,

 
Status
Not open for further replies.

Similar threads

jdmmech
  • Locked
  • Question Question
Vendor creates additional drawings for approval - Standard?
Replies
3
Views
336
looslib
looslib
jung71
  • Locked
  • Question Question
ASME B16.34 6.1.5 Contours at Body Ends
Replies
0
Views
94
jung71
jung71
smh345
  • Locked
  • Question Question
CORROSION ALLOWANCE AND ASME B16.34
Replies
5
Views
789
unclesyd
unclesyd
cranekiran
  • Locked
  • Question Question
ASME -B16.34 & Hazard Analysis?
Replies
0
Views
129
cranekiran
cranekiran
cozdemir
  • Locked
  • Question Question
B16.34 - Valves/Flanges for Butt Welded Ends...Std for Socket Welded?
Replies
3
Views
219
donfrikken
donfrikken

Part and Inventory Search

Sponsor

Back
Top