Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

B&R, Transfering my project.

Status
Not open for further replies.
lahotron

lahotron

Industrial
Aug 24, 2015
1
Hi,

I've been trying to run my project in Simulation (and check display on VNC viewer).
When I try to download a procjet to simulator, then I get (see atatched picture).

After Ok:
"Error 8028 while transferring*: Wrong PV initialisation format"


Can anybody help me with it?
Please check attached pictures.
 
 http://files.engineering.com/getfile.aspx?folder=7b2cb536-db0b-4be5-b4df-a2b141e318df&file=1.JPG
Status
Not open for further replies.

Similar threads

robinbreak
  • Locked
  • Question
A very simple PLC application & zero budget for hardware ??
Replies
7
Views
1K
seanleed
seanleed
Lucianmwm
  • Locked
  • Question
Power and temperature oscillation, between Power range 55% to 75%, CAT CG260/16
Replies
0
Views
572
Lucianmwm
Lucianmwm
HydroBuff
  • Locked
  • Question
Remote PLC Updates and Diagnostics Via Ethernet
Replies
0
Views
788
HydroBuff
HydroBuff
Faisal max
  • Locked
  • Question
Regarding TEM -1 , CPU-1 for MWM gas generator
Replies
4
Views
8K
Kjaman
K
Edward s
  • Locked
  • Question
One of my scada system screen is gray.
Replies
4
Views
382
IRstuff
IRstuff

Part and Inventory Search

Sponsor

Back
Top Bottom