Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

AWSd1.8 UT inspection

Status
Not open for further replies.
bhart192

bhart192

Civil/Environmental
Joined
Feb 6, 2006
Messages
81
Location
US
if your certified to ASNt level II for UT which meets AWS d.1 are there any additional requirements to examine welds fabricated under AWS d1.8
 
Sort by date Sort by votes
The Level II must be qualified per Annex E of AWS D1.8. The annex describes the practical examination and the test specimen that must be evaluated as well as the method of scoring the test results.

Best regards - Al
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

PetkovStoyan
  • Locked
  • Question Question
Inspection of keyway in bore
Replies
13
Views
2K
geesaman.d
geesaman.d
CTengIS
  • Locked
  • Solved
Hole position inspection without CMM, primary datum simulation
Replies
1
Views
984
geesaman.d
geesaman.d
Bazinga
  • Locked
  • Question Question
Inspection Plugs on hot insulation
Replies
4
Views
508
0707
0707
ASIT859
  • Locked
  • Question Question
FARO Cam2 - Straight Slot Surface Datum A, Flat Surface Datum B Inspection?
Replies
0
Views
867
ASIT859
ASIT859
vjesh
  • Locked
  • Question Question
Inspection
Replies
2
Views
307
0707
0707

Part and Inventory Search

Sponsor

Back
Top