Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
auto sampler
- Thread starter oillio
- Start date
I suppose with separator, you mean centrifugal separator and with testing you mean testing the separator?
at your inlet you will have a composite liquid
at outlet you will have two separated fractions.
If the quality of a fraction is conserned,sampler should be mounted in that fraction outlet line .
If operational quality of separator is conserned,sampler should be mounted in composite liquid inlet line.
When both outlet fractions can be quantified, good working condition of separator can be judged upon.
at your inlet you will have a composite liquid
at outlet you will have two separated fractions.
If the quality of a fraction is conserned,sampler should be mounted in that fraction outlet line .
If operational quality of separator is conserned,sampler should be mounted in composite liquid inlet line.
When both outlet fractions can be quantified, good working condition of separator can be judged upon.
- Thread starter
- #3
- Status