auto injection manifold in solidworks

[dbrlogan]

I'm looking for a Solidworks file of an injection manifold so I can study and practice. It would be helpful if it is a pre-85 small block as I can look at one of those but any file would help.

thanks

 

[ctopher]

To study and practice SolidWorks, or a pre-85 small block?
Are you a student?

Chris
SolidWorks 06 5.1/PDMWorks 06
AutoCAD 06
ctopher's home (updated 10-27-06)

 

[dbrlogan]

Two reasons: to get better at SW as I believe that there will be some excellent problems to work out and I have been asked to learn about engine component documentation/design for a possible future requirement for consulting, starting with the intake manifold.

 

[Heckler]

I would search the many data banks for model examples....ie

http://www.3dcontentcentral.com/3dcontentcentral/cc_frame.asp

Best Regards,

Heckler
Sr. Mechanical Engineer
SW2007 SP 2.0 & Pro/E 2001
Dell Precision 370
P4 3.6 GHz, 1GB RAM
XP Pro SP2.0
NVIDIA Quadro FX 1400
o
_`\(,_
(_)/ (_)

Never argue with an idiot. They'll bring you down to their level and beat you with experience every time.