Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Attn: Handleman (macro help)

Status
Not open for further replies.

BodyBagger

Mechanical
Joined
Feb 23, 2007
Messages
459
Location
US
Handleman,
I am trying to use your MACRO on my home system with SW2008 WinXP PRO 64 but I get the following error. It works fine on my work system with SW2009 Win VISTA 64. See included pic.Let me know if you can help with this, thanks much.

Not sure if you were still following the other post.
 
It's a reference problem. In the VBA editor, go to Tools->References, un-check the "MISSING:" 2009 references and check the corresponding 2008 references.

Unless I used new API functions. I can't remember.

Skiing today with my 4 1/2 year old daughter... worn out!

-handleman, CSWP (The new, easy test)
 
Thanks Handleman,
I will check it out and let you know tonight. Appreciate your help. Good luck on the slopes.
BB
 
Handleman,
Your suggestion fixed the issue I was having. Thanks very much.

BB
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top