Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ATEX I.S Inspection (mixed JB)

Status
Not open for further replies.
_Andy_

_Andy_

Electrical
Joined
Sep 12, 2024
Messages
1
Location
GB
Hi,

If there are multiple IS circuits connected to a instrument JB (legacy good IP rated JB) but over time the zoned area changes and only some of the instruments are still in the zoned area but the other instrument are now in a newly classified non-zoned area.

Do you still need to ATEX inspect the newly classified non-zoned area instruments?
 
Status
Not open for further replies.

Similar threads

odnaz
  • Locked
  • Question Question
ATEX Certification - Manometers & Thermometer (liquid expansion)
Replies
2
Views
252
ScottyUK
ScottyUK
ironopolis
  • Locked
  • Question Question
Multiple Atex Certification
Replies
6
Views
365
ScottyUK
ScottyUK
vjr0512
  • Locked
  • Question Question
ATEX certification
Replies
2
Views
267
IRstuff
IRstuff
Mwafrika
  • Locked
  • Question Question
Laser calibration and tank inspection
Replies
0
Views
141
Mwafrika
Mwafrika
sysengineer
  • Locked
  • Question Question
Cable Data for I.S. Verification Calculation
Replies
0
Views
326
sysengineer
sysengineer

Part and Inventory Search

Sponsor

Back
Top