Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASTMA 487 GR 4QM and T24S

Status
Not open for further replies.
mikeweld

mikeweld

Mechanical
Joined
Jan 7, 2005
Messages
2
Location
US
Are the above grades of stainless steel siutable for use in an H2S environment?

Thanking you in anticipation.
 
Sort by date Sort by votes
mikeweld - I would put this question in the "Corrosion Engineering" section.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Muhammad Ijaz
  • Locked
  • Question Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
1K
Muhammad Ijaz
Muhammad Ijaz
gwalkerb
  • Locked
  • Question Question
A420 Gr WPL6 impact test temperature documentation & unit systems
Replies
5
Views
1K
gwalkerb
gwalkerb
Andrewstructure
  • Locked
  • Question Question
Cast Steel - Johnstown Works Grade SX, .10-.20 C
Replies
0
Views
719
Andrewstructure
Andrewstructure
APIpipeWholesaler
  • Locked
  • Question Question
ASTM A252 Gr 3 with 50 KSI min yield
Replies
3
Views
1K
APIpipeWholesaler
APIpipeWholesaler
Tmoose
  • Locked
  • Question Question
astm E29 Significant digits / Significant figures - Sections 7.2 and 7.3
Replies
1
Views
432
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top