At our refinery we have recently had trouble with Propane that is contaminated with water. This is the first time we have encountered this. We do not currently run any lab tests to determine the concentration of H2O in propane so we are inexperienced with the particulars. I know that end-users of propane suggest using a Freeze Test Valve (small orifice) to determine the water content in accordance with ASTM D 2713. Problem is that I have had no luck in finding a vendor that sells these special freeze test valves. Any suggestions? Are there any other tests other than the freeze test that will satisfy ASTM standards?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
ASTM Test for H2O in Propane
- Thread starter DaEarl
- Start date
ASTM D 5454 applies to gas fuels. It mentions analysis techniqes based upon phosphorus pentoxide, P2O5, aluminum oxide, Al2O3, silicon sensors, piezoelectric-type cells and laser based technologies. COSA, GE Sensors and Ametek offer sensors suitable for moisture in propane.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
