Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASTM C478 Manhole precast concrete base, hoop rebar not allowed?

Status
Not open for further replies.
TehMightyEngineer

TehMightyEngineer

Structural
Joined
Aug 1, 2009
Messages
3,073
Location
US
I'm able to work around the requirement from 15.4.1 that doesn't allow hoop reinforcement in the base sections, so this isn't critical to get this answered. However, I'm exceedingly curious if anyone has a rational for why welded wire reinforcement is the only permitted reinforcement for monolithic base walls in precast manhole structures per ASTM C478. I cannot think of a single justification for this limitation. Further, why is this limitation waived when you do not have monolithic base slabs and riser section?

Professional Engineer (ME, NH, MA) Structural Engineer (IL)
American Concrete Industries
 
Status
Not open for further replies.

Similar threads

G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G
Wickerfields
  • Locked
  • Question Question
ASTM F1960, Sub Reference D2122-98
Replies
2
Views
1K
SWComposites
SWComposites
Muhammad Ijaz
  • Locked
  • Question Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
1K
Muhammad Ijaz
Muhammad Ijaz
Rubje
  • Locked
  • Question Question
ASTM A7, A30, A70
Replies
1
Views
1K
Dhurjati Sen
Dhurjati Sen
MujtabaQA
  • Locked
  • Question Question
Who can explain about Thin-wall pipe as per ASTM standard
Replies
6
Views
2K
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top