Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASTM & BS Impact Testing Machines

Status
Not open for further replies.
LRsurveyor

LRsurveyor

Mechanical
Sep 2, 2001
2
The two most commonly used Impact testing machines (Charpy V notch) are ASTM E23 type and BSEN 10045 type. Can anyone tell if the results of testing on these different machines will be comparable?
 
Replies continue below

Recommended for you

Sort by date Sort by votes
Status
Not open for further replies.

Similar threads

Muhammad Ijaz
  • Locked
  • Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
932
Muhammad Ijaz
Muhammad Ijaz
Wickerfields
  • Locked
  • Question
ASTM F1960, Sub Reference D2122-98
Replies
2
Views
958
SWComposites
SWComposites
G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G
Rubje
  • Locked
  • Question
ASTM A7, A30, A70
Replies
1
Views
956
Dhurjati Sen
Dhurjati Sen
MujtabaQA
  • Locked
  • Question
Who can explain about Thin-wall pipe as per ASTM standard 1
Replies
6
Views
2K
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top Bottom