Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASTM-A182

Status
Not open for further replies.
producer

producer

Mechanical
Joined
Aug 21, 2002
Messages
4
Location
NL
Does stainless steel flanges types:Blind, Slip-on,and Weld-neck can be produced out of hot rolled bar stock or forging
bars using mechnical process (turning,drillig,etc.)?
Does cold forming on hot rolled bar stock in production of stainless flanges is accepted?
Can you please transfer me to available web-site for confirmation.
 
Status
Not open for further replies.

Similar threads

Christian Dimitrov
  • Locked
  • Question Question
Forged flanges in A182 F347
Replies
7
Views
1K
EdStainless
EdStainless
Wickerfields
  • Locked
  • Question Question
ASTM F1960, Sub Reference D2122-98
Replies
2
Views
1K
SWComposites
SWComposites
G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G
Muhammad Ijaz
  • Locked
  • Question Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
1K
Muhammad Ijaz
Muhammad Ijaz
Rubje
  • Locked
  • Question Question
ASTM A7, A30, A70
Replies
1
Views
1K
Dhurjati Sen
Dhurjati Sen

Part and Inventory Search

Sponsor

Back
Top