Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ASTM 3/4" x 4" Die

Status
Not open for further replies.
Tronic

Tronic

Mechanical
Joined
Jun 23, 2004
Messages
1
Location
NL
ASTM 3/4" x 4" Die. Looking for standard this rectangular test piece die is referenced in. Anyone any ideas?
Thanks.
 
Status
Not open for further replies.

Similar threads

Muhammad Ijaz
  • Locked
  • Question Question
Availability of 3mm thick As rolled ASTM A516 70 plate normalized and impact tested
Replies
0
Views
1K
Muhammad Ijaz
Muhammad Ijaz
Wickerfields
  • Locked
  • Question Question
ASTM F1960, Sub Reference D2122-98
Replies
2
Views
1K
SWComposites
SWComposites
G
  • Locked
When I looked at the specification ASTM C33 I did not find the specification limits for the 1/2-inch sieve as mentioned in the
Replies
0
Views
1K
GHADA ALQARESH
G
Rubje
  • Locked
  • Question Question
ASTM A7, A30, A70
Replies
1
Views
1K
Dhurjati Sen
Dhurjati Sen
MujtabaQA
  • Locked
  • Question Question
Who can explain about Thin-wall pipe as per ASTM standard
Replies
6
Views
2K
EdStainless
EdStainless

Part and Inventory Search

Sponsor

Back
Top