Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Assy model not visible when doing part edit 1

Status
Not open for further replies.

KENAT

Mechanical
Joined
Jun 12, 2006
Messages
18,387
Location
US
We seem to have a problem with one of our assemblies.

When we have it open, and then try and 'edit part' it opens like normal but the rest of the assembly isn't visible.

It only seems to be this one assy that affected and it's not machine specific either.

I thought I'd seen settings related to this somewhere but we couldnt' find them earlier and a google search didn't turn up anything.

Can anyone think of what I'm missing?

Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
 
The setting is Show/Hide Previous Level, but I don't think it is file specific, more a user setting.

In ST it's on View > Show.
In V20 it's under View (I think - I'm working from memory on this one)
I usually add it to a toolbar or the QAT.

bc.
2.4GHz Core2 Quad, 4GB RAM,
Quadro FX4600.

Where would we be without sat-nav?
 
Awesome, thankyou. Appeared to do the trick.

Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top