assembly

[satish]

is it possible to simulate the selected parts after assebley.

from, s.satish kumar,

E-mail id: satishkumar@iffco.com

 

[kvision]

simulate? What are trying to do?

 

[satish]

i am trying to do CAM actuattion.

in the blow mould. i should simulate only the cam, not a complete mould.

 

[eServ]

If you are trying to simulate rotation you could assemble the cam by way of create, datum plane, by angle and just modify the angle dimension until the cam rotates to where you want it. Email me if you have more questions.

 

[kvision]

Try Mechanism. You can add pin, slider, cylinder, cam, slot, and other joints to accurately simulate your kinematics.