Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Assembly features in CATIA 3DExperience

  • Thread starter Thread starter Feminem
  • Start date Start date
F

Feminem

Guest
Hi, everyone. Could someone describe functional the "impact manager" in assembly features (Hole, cut and etc). It's a real issue in CATIA V5 when assembly features are active even on parts. SW has option "Hole Series" which allow to deactivate assembly features on parts, but it will be active in assembly geometry. I want to create drawings of an assembly with as.features and drawings of part without these features in same time. Thank you.
 

Attachments

  • Impact.JPG
    Impact.JPG
    34.1 KB · Views: 6
You must log in or register to reply here.

Similar threads

CAD2015
  • Question Question
3DEXPERIENCE - Catia on cloud.........
Replies
4
Views
6K
Azzazil
Azzazil
A
  • Question Question
CATIA V5 ASSEMBLY DESIGN CONSTRAINS
Replies
4
Views
6K
ferdo
ferdo
spe88
  • Locked
  • Question Question
CenitFlex+ / CATIA / 3dexperience (ENOVIA) hybrid running
Replies
5
Views
2K
Little Cthulhu
Little Cthulhu
Antoine Delarche
  • Locked
  • Question Question
3Dexperience: hide/show parts from an assembly with a rule
Replies
0
Views
895
Antoine Delarche
Antoine Delarche
R
  • Question Question
Catia V5 Kinematic suspension assembly help
Replies
1
Views
8K
raz2
raz2

Part and Inventory Search

Sponsor

Back
Top